Home Guide

Car battery starter buying guide

Buying a battery starter for your car should not take you the entire day to decide on which one. But at the same time, buying one without any beforehand consideration can often lead to great disappointment. And that is why we are here for you. In this article, we will present you with some criteria you need to look out for when buying this device. Here they are

Cable

Car battery starter
credit: amazon.com

This is like the bridge between your battery jumper and your car, so it needs to be strong and up to the task. The diameter should be thick so that it can handle more amps while transmitting. The material should be somewhat durable so that you can use it for a long time and have high melting point to prevent any unwanted accident. And lastly, the two protection layers should be made of high quality material so as to reduce the risk of bad things happening.

Need the best jumper cables? Read more about it using the link right here.

Capacity

It is extremely difficult to give you an exact number as each engine is different in size and capacity. However, we do have some reference number for you:

Capacity
credit: http://www.globalsources.com

If you have 4-cylinder petrol or gas engine, a machine with 150-200A is enough. For 6-cylinder, make it 200-250A. As for 8-cylinder engine, it requires a 250-300A jumper.

If you have diesel engine, just double the number and you will have a better idea of what to look for.

So as you can see, if you want to know the suitable capacity of your jumper, check the engine size and how many cylinders your car has. That and which type of fuel your engine feeds on. It should give you your answer.

Temperature

You will definitely need to use this during winter or very cold weather. During that time, the battery has highly chance of dead and the performance of your battery jumper can decrease enormously. To deal with this, you need to buy a device with higher peak and cranking current than those of your car. This will ensure that the jumper will have enough power to start your car even in a cold day.

Safety
credit: http://www.ebay.com

Safety features

Although the process of reviving your battery may sound simple and easy, there are some hidden risks as well. You may never know what is going to happen. Hence, it is recommended that your jumper have some of the following safety features just in case something goes south even though you following the instructions carefully. Some of them can be: overload protection, overcharge protection, over current protection, etc.

Additional features

Its main job is to resurrect dead battery but some may have other cool additional features as well. This includes: multiple charging ports (phone charger, laptop, etc.), flash light for reviving in dark condition, etc. If you don’t want to leave your device dormant for long, then buying the one with many features might not be a bad idea. They may cost a bit more but some of them are sure worth the money

 

Home Guide

Common house problems and how to fix them

Taking care of your house can be a daunting task. That is not entirely true as there are some repair jobs that you can do yourself. In this article, we will present you a list of the most common and simple house repair jobs. This will help you take better care of your living space and save you some extra cash to spend on something else.

House problems
credit: wickles.co.uk

Toilet

Two of the most common problems: clogged toilet and broken lever. If your toilet is clogged, you need to use a plunger for this. Put it over the hole and flush the toilet to add water to the bowl. Give it some thrusts and water should flow freely now.

Toilet
credit: Bunnings.com.au

If the lever is broken, first you need to open the water tank and re-connect the chain. If it is too corroded, it is time you bought a new one. You can buy the parts at a common hardware stores and the seller will be more than happy to show you how to do it.

Leaked pipe

Firstly, you need to cut the water supply to the sink. Next, put a bucket or some kind of water container below the sink and unscrew the compression nut. Dirty water will come out and you can clean the hose in the process as well. Then put a new hose in place and put everything back into place.

You can simple patch the leak parts but you should use it for minor leaks only. For serious case, it is better to buy a new one instead.

You can visit watersystempro to find out more about this problem.

Replace light switches

Replace light switches
credit: youtube.com

You might be tempted to left this to a pro but you can do it yourself as well. Firstly, shut the power to the switch and begin removing the faceplate covering the switch. Then proceed to remove the switch from the wall and you will see the two wires connecting to it. Cut the two wires and attach them to a new switch, remember to do it carefully and correctly. After that, put everything back in its place and you are done

Holes patching

Holes can make your walls look unaesthetic and they can become bigger, which will affect the structural soundness of the house. To deal with this problem, clear the holes of any dirt and try to stack some spackle into them. Then let them dry and use sandpaper to smoothen the surface.

Home Guide, Uncategorized

Safe factors when you using the air compressor

Compressors should be maintained periodically according to the technical documentation. It is necessary to comply with the recommendations that the compressor inspector has stated in the petition. Also, you can refer to the following for better air compressor maintenance work. And you can visit here for more information about best air compressor.

For air compressors

For air compressors
credit: ebay.com
  • The compressor must be operated by the operating manual.
  • Electrical equipment must be grounded.
  • When repairing, turn off the power and hang up the plate:
  • All navigation devices must have a protective cap.
  • Alarm devices should always be in good working condition.
  • Not repaired when the machine is working.
  • No flammable dirt on the edge of the machine.
  • Fire prevention and protection must always be guaranteed and ready when the problem occurs.
  • Machine operators must strictly comply with the regulations on labor safety and environmental protection.

For compressed air tanks

For compressed air tanks
credit: alibaba.com

– Safe work on compressed air tanks requires the user to be trained and tested professionally, by regulations and safety regulations.

– Comply with the following provisions:

  • Do not allow repair of cylinders and parts subjected to pressure while working.
  • It is forbidden to insert, brake, hang heavy loads or use any means to increase the load of the safety valve while the tank is used.

– The use of jugs in the following cases is not allowed or suspended:

  • When the pressure is increased beyond the allowable pressure, although other requirements specified in the operating procedures are guaranteed.
  • When the safety structure is not perfect.
  • When the basic parts of the jar are found to have cracks, distortion, fouling or watering in the welds, leakage in the bolt or rivets, the pads are fibrous …
  • When a fire threatens directly to a pressurized container

When the pressure gauge is damaged and unable to work.

  • Must comply with inspection regulations for pressure vessels. Check inside three years/times.

Hydraulic pressing six years/times

The safety valve of the bottle must also be inspected regularly and pressed every six months with pressure not exceeding 110 atm.

Note: it is necessary to comply with the requirements required by the safety unit. The operator of the compressor must be trained in safety and a certificate of operation of the pressure equipment.

Hydraulic pressing six years/times
credit: nerdist.com

Risk factors when using compressors and electrical equipment

  • Shockwave; Fire, explode by oil decomposition;
  • Explosion due to equipment does not guarantee durability; Due to noise, vibration;
  • Injuries caused by moving parts, pieces of material, splinters, shotguns.

Safety measures for compressors and electrical appliances:

  • Workers must fully meet the requirements such as occupational certification, health; Trained – safe and well-equipped with safe facilities …
  • The pressure components of the compressor (gas tank, gas pipeline) must be declared and inspected according to regulations;
  • Measurement tools must be properly installed, good lighting;
  • For cooling water compressors, the water valve must be opened to cool the cylinder before running the machine.
  • Only operate the machine when there are adequate safety devices (membrane, safety valve, …), the right measuring instrument and precise operation;
  • It must be quickly shut down when the pressure gauge reaches the allowable number;

 

Home Guide

Tips to buy a bed
Buying a bed
credit: luxdeco.com

In your house, the bed is probably the object that you spend the most time with. For that, it is worth investing a bit of time and money into buying this. However, with hundreds of models and brands currently on the market, choosing the one for you might be a problem. That’s why we are here. In this article, we will show you some tips to select the most suitable bed for your personal need. Here goes:

1/ Research online but buy offline

Research online purchase offline
credit: zeendo.com

Before you actually go out and buy it, do a quick research online for the one that fits your personal preference. When you have found the perfect one, don’t click on order just yet. You should test the mattress in person. Because if something looks good in a picture, it does not necessarily means it will feels good in real life. Besides, product reviews are, for the most part, personal bias. Even if something gets all positive ratings, you would be better off testing it in person.

2/ Understand the types

Bed types
credit: pinterest.com

Here are the three most popular types of mattress on the market:

Inner spring: A traditional mattress. This is perfect for those who are currently on low budget or intend to upgrade in a few years.

Foam mattress: This is perfect for those who are sensitive to pressure because there are no metals inside it.

Air mattress: An adjustable mattress. You can increase of decrease the firmness by altering the amount of air inside it.

Find out what you suits your personal taste and needs, test them all out and go with the one you like most.

3/ Test the mattress in person Test the mattress

Try lying on the mattress for about 15 minutes to check if it is comfortable or not. Try all other sleeping positions as well. You are going to spend many hours a night with it so it is a good idea to try it out in advance. If your current mattress is ancient, everything will feel brand new or strange at first; it will take a while to get used to it.

 

4/ Cost and maintenance

Before deciding to buy something, you should make sure that you know how much it cost and if you are comfortable with it or not. You should also ask the clerk about the delivery and other additional costs i.e. cost of removing the old one or installing a new one. These can add to make up a considerable sum so you should use your negotiation skills to lower it down.

5/ Protect your investment

Protect your product
credit: overstock.com

Causing too much damage to it and you are at risk losing the warranty; therefore, I would also suggest a mattress cover to go with it. Mattress tends to harden with age, while people usually need a softer of as they get older. To tackle this problem, I’d suggest that you buy a latex topper or high quality gel to add more life to your mattress.

Another trick to help prolong the life of the mattress is to rotate it once in a while, especially if you sleep with your significant other. If there is a sharp difference in weight between two partners, one side of the mattress will wear out much faster. Therefore, you should do this trick about twice a year.

That was it for this article. We do hope that you have found some useful information for yourself. If you wish to read more articles related to this topic, please click here to pay a visit to our website. I can guarantee that you will not be disappointed. Thank you for reading with us.

 

 

Home Guide

Lauren by Ralph Lauren down alternative comforters review

In this post, I’m going to give a full review of the newest alternative down comforter  from Ralph Lauren.

Product detail

Ralph Lauren down comforter
credit: http://www.thehomecompanyomaha.com/

The product dimension is 90(W)” x 92(L)” or 229(W) cm x 234(L) cm and weight 7.2 pounds. The comforter is filled with white alternative down and Lite Loft resilient hypoallergenic fill. Cover with 100% cotton, it also has corner loops for attachment to LRL duvet cover.

Pros

The comforter has medium weight, not too light or too heavy. The fill quality is really good. When you press your hand on it and release, it puffs right back.

Pros
credit: amazon.com

Because it is filled with hypoallergenic fill, you won’t have to worry about down allergy anymore.

A good year-round comforter, not too hot on summer but still very warm in winter. It’s all because of the breathable material.

The down fill is sectioned in squares and seal tightly. This will prevent the fill inside to slip away and maintain the shape of the comforter.

4 corner loops for easier attachment to LRL duvet cover. This way the cover won’t get loose anymore.

Cons

Cons
credit: webmd.com

I notice this one making noises when I turn in my sleep. It may don’t matter too much for most people but I’m very sensitive when I sleep so this is kind of disturbing. Hope I can fix this after a few wash to soften the fabric.

It could look thin for some people and doesn’t suitable in cold climate areas. And the package doesn’t come with a duvet cover. I have to purchase one myself.

Only comes with one size, the queen comforter looks too big on my single bed. They should come with the single or twin version.